C-Bus 5200PG Uživatelský manuál stáhnout pdf (Strana 7)

Wiser Home Controller User's Manual

The Wiser Home Controller router connects to the following:

• Power - provided by a plug-pack connected to the busbar

• Wide Area Network (WAN) - this is the Internet connection, usually via

the busbar

• Connection to CNI - this is normally done by the busbar

• Other Ethernet Devices - these are plugged into the spare Ethernet

ports

The CNI connects to:

• Power - provided by a plug-pack connected to the busbar

• C-Bus - this is the connection to C-Bus and is normally a pink cable

• Connection to Wiser Home Controller - this is normally done by the

busbar

The certified installer uses Clipsal PICED and C-Bus Toolkit software to

create a unique project for the customer's home. The project is transferred

to the Wiser router unit. It is then ready to be used with the Wiser User

Interface (Wiser UI). With the appropriate settings, the configuration can be

modified later and the project loaded, as needed.

The installer provides the homeowner with the IP address and security

codes needed to access the project. The Wiser UI can be accessed at home

or remotely over the Internet.

2.2 Status Indicator LEDs

The LEDs on the Wiser Home Controller and CNI provide useful information

about the status of the system.

Wiser Home Controller router

The locations and meanings of the various LEDs on the Wiser Home

Controller router unit are shown below.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Žádné komentáře

C-Bus 5200PG Uživatelský manuál Strana 7